Enterprise quality WiFi at home

What if you could get enterprise quality WiFii at home for a price that is much more closer to regular home prices? That's the dream that Ubiquiti promises with their Unifi line of networking gear.

What most people call a router is actually several devices combined into one: a router, a switch and a wireless access point. To get the best performance and have the best upgrade cycle, I strongly recommend splitting them up. By saying the best upgrade cycle I mean this: you will end up replacing network gear in your lifetime and you should replace only what you need to. When a new WiFi standard comes out with way faster speeds, simply replace the access point(s). Buy a nice switch with enough ports for your future needs and you won't need to replace it until 10GbE gear comes down in price. Buy a nice router and you won't need to replace it until you have internet speeds greater than 1gb/s.


The Ubiquiti Unifi interface is probably my favourite part of the whole system. Just look at this:

It's very powerful, while also being incredibly easy to use and nice to look at. It shames most router interfaces that look like they were designed back when people hosted sites on Geocities. Most of them look like this:


The first stop as data flows into your house is your modem. Nowadays ISPs are even trying to bundle modems into a single box with wireless routers. These are great for light usage, but can't handle much in the way of traffic or configuration. You're going to want to ask your ISP for either a separate modem or a modem/router combination that can be put into "bridge mode". Bridge mode basically disables the router functionality, which is what we want because we'll be using our own router.


After the modem, we need to add a router. A router takes your IP address that the ISP gives you on the public and creates a private network with each computer/device in your network having it's own private IP address. For heavy downloading/gaming/etc you want a nice stable router, that can handle a lot of connections and has good throughput. Cheaper routers can be overwhelmed in these situations and need to be rebooted. Ubiquiti sells a router called the Ubiquiti Unifi Security Gateway (USG). It's a great router for a bit over a hundred dollars. Super stable, can handle a ton of connections at once and a simple, easy to use UI to configure it.

Unifi Router: https://www.ubnt.com/unifi-routing/usg/


The Ubiquiti Unifi Switch is a great switch but also pretty expensive. Their wheelhouse is in PoE switches, as all of theirs come with PoE. This adds to the price and I decided not to go with one because of this. Their access points come with injectors so the wiring is a bit messier but I saved a couple hundred bucks going with a Cisco switch instead.

Unifi Switches: https://www.ubnt.com/enterprise/#unifi-switch:hardware
Cisco Switch: http://www.cisco.com/c/en/us/support/switches/sg200-26-26-port-gigabit-smart-switch/model.html

Access Points

We wired our house with a ceiling mounted Ethernet jack on each floor specifically for adding wireless access points after we moved in. These have many benefits to the average user:

  • You get great coverage because there is always an access point nearby. I get a solid 5 bars everywhere in the house.
  • They keep wiring completely hidden. They basically just look like another sleek smoke detector, with no exposed wires at all.

Unifi Access Point: https://www.ubnt.com/unifi/unifi-ap-ac-pro/